NAA - 800 running board question

I have 3 left side running boards all different. The right side is later style w/holes punched in. The center style w/ large holes is S.O.S. The left style with diamond plate is early style. Am I right about
that or what is the correct info?
a173694.jpg

a173695.jpg
 
I believe the one on the left with the raised squares would need to have a lid in it for the toolbox if it were an original Jubilee/NAA running board.

Also, as far as the middle one is concerned, I have a 1957 860 that had the original "Powermaster with spinning gear" decal on its hood. It has a left running board like the one in the middle--with the linkage running through it--and I believe it to be original. Seems like near the end of the run, Ford put out some 860's that were part x00 and part x01 tractors?

Jeff
 
It looks like the left one is an 8N, middle one is a 100 series 5 speed and the right one is a 100 series 4 speed
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top