Ford 2000 Industrial Factory backhoe/loader

Stuperbob

New User
I just recently acquired a Ford 2000 4cyl that I need help with, I need Photos or diagrams for how the backhoe and loader hydraulics are hooked up and what the back section of the backhoe looks like

I also need to see if I can find the factory style loader valve that drains directly back into the loader body. the one I have looks to be cracked around the pressure relief valve.

I will get pictures of what i have soon but any pictures of assemble tractors would be good.

Looks similar to this one :http://www.yesterdaystractors.com/cgi-bin/viewit.cgi?bd=ford&th=486304

and almost identical to:
http://www.yesterdaystractors.com/cgi-bin/viewit.cgi?bd=ford&th=489852
 
What you have is a light industrial. The loader could be a 725. Control valve (component 19-335). It might also be a 720 loader. The backhoe could be a 723 ford or earlier
WainRoy. They are the same ones used on the heavy duty models. They are basically the same. There was another model backhoe also used at that time but I don't remember the number.
Will have to think on it. Does your tractor also have a deverter valve to run the backhoe? Your loader and backhoe should have tags on them on the frame. Try to locate them.

Kirk
 
The parts diagrams at Messicks might be useful to you:

<a href = "http://www.messicks.com/nh/56504">Ford 723 Parts </a>

<a href = "http://www.messicks.com/nh/56218">Ford 725 Parts </a>
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top