1973 Ford 2000 input oil seal #

ptfarmer · Jun 23, 2017

Anyone have a good part number for a input shaft oil seal for a 1973 Ford 2000 6x2 with transmission pto. The id is 1.125", the od is 2.187", the width is .500"

Sean in PA · Jun 23, 2017

Here is a link to the parts drawing for the 6 speed gears, including the input shafts. Unfortunately, the input shaft seal descriptions leave a lot to be desired. it looks like what you need may be listed under either of the part numbers for number 9 or the one for number 10, but I couldn't say which it is. Be sure to hover your mouse over the exclamation point icons next to the part numbers, as that will show you the latest part number in the list of superseded numbers for each.

[u:e4b4b48395] 6 speed transmission gears parts drawing[/u:e4b4b48395]

ptfarmer · Jun 23, 2017

(quoted from post at 19:59:39 06/23/17) Here is a link to the parts drawing for the 6 speed gears, including the input shafts. Unfortunately, the input shaft seal descriptions leave a lot to be desired. it looks like what you need may be listed under either of the part numbers for number 9 or the one for number 10, but I couldn't say which it is. Be sure to hover your mouse over the exclamation point icons next to the part numbers, as that will show you the latest part number in the list of superseded numbers for each.

[u:55ccb03089] 6 speed transmission gears parts drawing[/u:55ccb03089]

Yes, the part descriptions do leave a lot to be desired. Anyways I managed to find the part number, D9NN7R510BA is the obsolete part number. The new part number is 83924924.

agjim · Jun 24, 2017

I got mine thru TISCO

1973 Ford 2000 input oil seal #

ptfarmer

Well-known Member

Sean in PA

Well-known Member

ptfarmer

Well-known Member

agjim

Member

Similar threads