Not an antique, but I know you guys have the answers. The remotes on my NH 5610S leak like a sieve. From what I gather, I have the newer style setup(see attached pic). Can anyone tell me what size orings the sockets take? NH parts diagram does not call them out and the parts guy at my local NH dealer had no idea (just blows my mind how useless these guys are sometimes! Nothing like the old guys who could quote part numbers without even looking at the book). Also, I had replaced the lower plug and oring on the right side of the unit, and it continues to pop out an weep oil all the time. Do these have to be driven in to seal and stay put?
 
Pic attached this time, I think
a161450.jpg
 
The O-ring that seal against the tip is p/n 9861431 and is 90 Duro, .799" ID x .103".

Your leak at the soft plug is due to a slipper seal leaking around one of the barrels in that circuit, likely the lower one. You need two each of 9845951 and 47866408 to seal each barrel. The barrels unscrew from the housings and the slippers and orings are installed in the housing. There is a single part number for the slipper /oring pair but I can't locate it from here at home.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top