Just Bought a Ford 4000

This message is a reply to an archived post by DaveDiesel on May 29, 2016 at 16:56:42.
The original subject was "Just Bought a Ford 4000".

Hey i just found one all there with a loader . Flat top fender and a little rough but starts . The clutch was replaced a few years ago but stop working he said a $ 850 . I don't know much about these but it sounds like a good deal
 

I'm assuming from "flat top fender" that it's one of the later 3 cylinder models.

It must not be much of a tractor for $850.00 . . . or else the seller doesn't know what he's got.
 
What do you mean by "the clutch stopped working"?
Doesn't engage or doesn't disengage?
What transmission? Got a picture of the tractor?
 
He put a new clutch and pressure plate in it it
worked for a while and now it won't disengage I
believe it's a four-speed transmission with hi low
range has three cylinder diesel engine has a loader
on the front does smoke a little bit but started right
up and runs I went there to go buy a plow had a
show me the tractor all sheet-metal is there not
very pretty but not all dented up I will try to get some
pictures if he doesn't sell it I believe we talked about
my Ford and MAAHopefully I can get some pictures
put on here
 
A 3 cylinder 4000 with an 8 speed and a loader that runs is definitely worth more than what he is asking, even needing a new clutch, but it sounds more like it is just stuck. If you decide not to buy it would you mind letting us know where its located?
 
That sounds like the clutch disk is just stuck.
At that price it would be well worth fixing to me.
 

I'm very interested if it's not to far away.
If it's to rough to fix it would make a good parts supplier for the ones I have.
Not interested in the loader unless it's quick attach.

Post a pic if you can.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top