(800) 853-2651
SHOP NOW

Sheet metal for 660 Ford dash

A

Ag Man

Member
Working helping some high school kids restore a 660 Ford. We are planning to order sheet metal(hood and etc. from Dennis Carpenter) We
need the dash panel and the sheet metal that is underneath the dash. All or any help would be appreciated. We are located about 50 miles
west of Houston TX. Thanks for any info. Ag Man
 

You best bet is salvage yards. All of the models use the same one, and they rarely get damaged so they are readily available. The main hurdle to getting one however, is steering wheel removal. Salvage yards don't often take them off because of difficulty removing the wheel. Chances are they will let you have it for nothing if you use the wheel removal as a training session.
 
The dash sheetmetal that houses the gauges is different between the 600/601 series and the 800/801 series due to
the hole location for the steering shaft. The steering shaft hole is closer to the back edge of the panel due to
the hood sheetmetal being mounted higher on the 800/801 series. Best to look for a 600/601 series in a salvage
yard if working on a 660 so the dash panel fits correctly.
 
You must log in or register to reply here.

Similar threads

chuck machinist
Sheet metal on Ford 2000 Dash 3000
Replies
7
Views
797
Sean in PA
S
B
65-75 Ford 2000 & 3000 Sheet Metal Changes ???
Replies
9
Views
1K
Destroked 450
Destroked 450
T
Ford Project
Replies
13
Views
971
TractorTucker
T
F
Newbie that needs help finding part names for a repair
Replies
8
Views
768
Destroked 450
Destroked 450
G
Sheet metal for 600 Ford
Replies
3
Views
1K
grandpa Love
grandpa Love
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top