Spring on choke plate

If you are referring to the spring that holds the little flapper against the choke plate, yes they are available and I would
recommend replacing it.
p.n. 9N9560
NH price is $19.00
TISCO price about $2.00 - $3.00.
 
The one on the plate that holds the flapper closed?
I have dozens of them. Email me your address and I'll send you one.
It, and the one on the shaft itself, come with a good rebuilt kit.
 
(quoted from post at 06:30:09 04/12/17) The one on the plate that holds the flapper closed?
I have dozens of them. Email me your address and I'll send you one.
It, and the one on the shaft itself, come with a good rebuilt kit.
I have a 9n and a Jubliee both are missing the springs, could I mail you $5 or 10 an you could mail me a couple? Bill Roberts w 7630 cnty rd s Adell wi 53001
 
(quoted from post at 13:15:21 04/12/17)
(quoted from post at 06:30:09 04/12/17) The one on the plate that holds the flapper closed?
I have dozens of them. Email me your address and I'll send you one.
It, and the one on the shaft itself, come with a good rebuilt kit.
I have a 9n and a Jubliee both are missing the springs, could I mail you $5 or 10 an you could mail me a couple? Bill Roberts w 7630 cnty rd s Adell wi 53001
I'll put them in the mail tomorrow Bill. No need to pay for them.
We are talking about the one on the choke valve as pictured, right?

47720.jpg
 
You're welcome! They are in the envelope and will be in the
mail from central Michigan tomorrow. Shouldn't take long.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top