Pie Weights - Part 2

sdhow

New User
This message is a reply to an archived post by TONY JACOBS on April 03, 2014 at 21:11:52.
The original subject was "Re: Pie Weights Part 2".

Hi, Tony! You mention you have examples of weight segments from both Central and Western State foundries. I have a set that is missing some segments, but differ from what I've seen online, albeit those have all been from the Midwest or East Coast. Do you have any pics of what the weights cast out West look like?

Thanks!
Sean
 
Kirk-NJ- OP is a new user and this is they'er first post. So, they will not have picture posting privilege yet.
 
Spoke with Tony last night; these definitely appear to be from a West Coast foundry, so no markings on them. One distinct feature is the cut out for valve stem access; it's not a 45 degree or 1/4 circle, but in fact a 90 degree notch out of each weight. I'll try to send over some pics this weekend for posting.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top