NAA lift arm travel

moran

Member
Amongst the many potential flaws in its old hydraulic system what is the most likely culprit that would make the loader arms only lift my Woods
mower off the ground a foot when the control reaches the last couple of inches of its travel? Nothing happens for the first 90% of the control's
travel but the last 10% picks it up enough to clear the ground and does it quickly.
 
(quoted from post at 12:20:27 07/30/16) Amongst the many potential flaws in its old hydraulic system what is the most likely culprit that would make the loader arms only lift my Woods
mower off the ground a foot when the control reaches the last couple of inches of its travel? Nothing happens for the first 90% of the control's
travel but the last 10% picks it up enough to clear the ground and does it quickly.

probably linkage adjustment under the top cover would help a great deal. tons of posts on this subject and lots of info in your manual.
 
OK thanks, I'll search for "linkage adjustment" and try to decipher the manual instructions. You seem to feel it's an adjustment not a leakage or
worn part causing this. Thanks again -
 
I've not tried it on draft control but will. I almost only use the NAA on position control either with a Woods "Bush Hog" type mower or a rear scraper blade on my dirt driveway.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top