6610 steering column

Anyone on here rebuilt a steering column off a 6610 or similar.
1- the seal kit i got from the new holland dealer has 7 o rings and a seal in it. I only found a use for 3 orings an the seal.
2- as i pulled the lower block off the lower steering shaft slid out with it. Along with a bunch of little steel balls. How the hell do i get those back in an how many are there supposed to be.
38291.jpg
38292.jpg
 
1) The extra o-rings are for the older version of that box that was used on the x600 series tractors.
2) The parts book tells you how many balls there are. Myself, I pack the grooves with vaseline and roll them back in the grooves, then thread the shaft back in just as you would a bolt into a nut.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top