58 workmaster
Member
Hi All I thought i had this fixed on my 1958 ford 621 I put a new alt on do to bad bearing and i thought it was burning up points some how. I was in woods on sat when it started acting up again. It's been great for about a month on short use at home. Anyway i reajusted the points and cleaned them and it ran for alittle bit but not great. I set points at 25 and after it starts running crapy they are real wide but never loosing up. This tractor was 12 volt when i got it in 07 and till different eng now i have put four sets of points in it. This tractor never had a voltage resistor before but should it have one and is that the reason the points are going bad?. Thanks. D