Scuppertrout
New User
The whole front end fell off my 4600 today. The part that broke is under the raditor attached to the frame. I have a photo but don't know how to post it. Big cast iron part looks like 4 bolts hold it on.
- Thread starter Scuppertrout
- Start date
Ultradog MN
Well-known Member
- Location
- Twin Cities
They generally call that the front bolster.
What broke? The bolster or the front of the
engine?
It shouldn't be too hard to find a used one.
I'm pretty sure one from a 3 cyl 4000 is the
same so from 1965 through 1983 should fit.
What broke? The bolster or the front of the
engine?
It shouldn't be too hard to find a used one.
I'm pretty sure one from a 3 cyl 4000 is the
same so from 1965 through 1983 should fit.
Scuppertrout
New User
i think it was the pivot bracket
john in la
Well-known Member
That looks like the Trunnion Bracket.
Not real familiar with the newer tractors so do your own research to make sure you get the correct part.
But the link shows one.
Trunnion Bracket
Not real familiar with the newer tractors so do your own research to make sure you get the correct part.
But the link shows one.
Trunnion Bracket
john in la
Well-known Member
Lets try the link again.
https://www.link_disallowed/parts/trunnion-bracket-3n051d-c5nn.html
Trunnion Bracket
https://www.link_disallowed/parts/trunnion-bracket-3n051d-c5nn.html
Trunnion Bracket
john in la
Well-known Member
Oh well.
Guess this web site is afraid of a little competition even though they do not sell this part.
Just go to wengers dot com and search the part. Not sure it was the correct one but they have one listed for $135
Guess this web site is afraid of a little competition even though they do not sell this part.
Just go to wengers dot com and search the part. Not sure it was the correct one but they have one listed for $135
Fordfarmer
Well-known Member
As John said - trunion bracket. They have a bushing in them. If that wears through, then they wear into the casting and eventually break.
Ultra is right, too - one from a '65-'75 4000 will work. I seem to recall either Ultra or his friend Kenny making a replacement for a broken one a few years ago, too.
Ultra is right, too - one from a '65-'75 4000 will work. I seem to recall either Ultra or his friend Kenny making a replacement for a broken one a few years ago, too.
I see them for sale on ebay . You can tell by the repeated similar auctions when a seller is parting out a tractor . Most scrappers don't bother listing that part because it is heavy and in low demand .
Search by nearest first and you may find a seller closer than you thought . You may have to ask if they have one available .
What is your zip code ?
Destroked 450
Well-known Member
- Location
- Harned, Ky
Where are you located, I have two 4000 front axles, one out and one I'm getting ready to replace.
Elton Fancher
Member
I have one off a 3400 looks the same.
Similar threads
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy