1968 Ford 5200 upgrade PTO Brake to 1973-75 band style

reddeermaine

New User
I have a 1968 Ford 5200 that I am restoring and would like to upgrade the PTO Brake from a brake arm to the band style.
The band style was on the 1973-75 Ford 5000 PTO brake system.
Will the Items # 70 & 86-96 from New Holland on line parts page 07D05 POWER TAKE OFF ASSEMBLY, SINGLE SPEED -5000. fit the 1968 model?
I can find all the parts but item # 96 "PTO Drive Clutch Actuating, Arm start year 01-JUN-73.
If items 86-95 would work with the older Item# 17 Hydraulic Valve the items 70 valve and 96 arm would not be needed.

Any salvage 5000 parts out there from 1973-75?
 
The brake band style control valve requires two locating pins, along with the corresponding drilled hole in the rear axle center housing. Unless you drilled that hole exactly where it needs to be, you'll end up with alignment issues. The actuating lever location is different as well.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top