661 slide show

Du Farmsabit · Nov 27, 2015

Here's how i did mine. Some of the things i learned and will try to do better next time: Keep as many parts as possible, and find ways to restore them, because the new parts from China are never as good, or fit quite right. Get a sprayer, while brushing does work, it still shows on the smooth metal, and the rattle cans have different numbers than the liquid so they don't quite match. And i need to learn how to do body work better. And of coarse visit here, and ask as many questions as possible! LOL

https://www.youtube.com/watch?v=w5x1TKSDL9g

Larry NCKS · Nov 27, 2015

And learn how to put up a link :lol:

https://www.youtube.com/watch?v=w5x1TKSDL9g

Du Farmsabit · Nov 27, 2015

I really did try harder this time, but still couldn't figure it out, even in "modern view"

Larry NCKS · Nov 27, 2015

(quoted from post at 08:47:08 11/27/15) I really did try harder this time, but still couldn't figure it out, even in "modern view"

No to hard in modern view. Upper right button that says URL then your link then URL again.

Then again, there are those that know how to use the HREF syntax to rename the link so that it might say "661 slide show" rather than posting the URL like we did. I've used that previously but to few and far between. :shock: [/url]

sotxbill · Nov 27, 2015

Nice job.

Royse · Nov 27, 2015

Very nice! You didn't mention "take lots of pictures so you know how it came apart", but obviously you took good pictures!

As for the link, if you typed

[code:1:747430d423][url=https://www.youtube.com/watch?v=w5x1TKSDL9g]661 Slideshow[/url][/code:1:747430d423]

it would show up like this: 661 Slideshow

Larry NCKS · Nov 27, 2015

Camp Mt. Hermon

Well! I'll be dang! Simple as pie!

Du Farmsabit · Nov 27, 2015

thank you , yeah, i did have to look at a pic to remember how to hook the throttle, and governor back up

ASEguy · Nov 28, 2015

Very nice job.

Lanexa Speedway · Nov 28, 2015

Nice job!

connor9988 · Nov 28, 2015

Du Farmsabit, its no big deal. Its fairly simple to do.
1.When you are watching your video just look below the video and you should see 3 buttons: "add too" "Share" and "More"
2.Click on the "share" button and it will bring up some options on how to share it to others.
3. After you have clicked on the share button it will bring up 3 more buttons below it: "Share" "Embed" and "Email"
4.Click on "Embed" and all you have to do is copy the link it gives you into your YTMAG "comments" box (like im doing write now to write this post to you) and it will automatically post the video IN your chat window.

Note: the link you copied will look something similar to this: -iframe width="420" height="315" src="https://www.youtube.com/embed/dp-qYS7sDJI" frameborder="0" allowfullscreen></iframe-

I'll do it with one of mine so you can see what it looks like.
<iframe width="420" height="315" src="https://www.youtube.com/embed/dp-qYS7sDJI" frameborder="0" allowfullscreen></iframe>

661 slide show

Du Farmsabit

Member

Larry NCKS

Well-known Member

Du Farmsabit

Member

Larry NCKS

Well-known Member

sotxbill

Well-known Member

Royse

Well-known Member

Larry NCKS

Well-known Member

Du Farmsabit

Member

ASEguy

Well-known Member

Lanexa Speedway

Member

connor9988

Well-known Member

Similar threads