1841-s

hey everyone,
getting ready to finish up the conversion from cable steering and would like to do a few other changes and a partial paint job. along with the project several questions have came up. ill make a list and if you have any input we would gladly appreciate it.

#1. paint colors. looks like tisco 310 and 330 are close colors. does anyone have similar colors that i can buy local at an ace or lowes type stores?

#2 missing one headlight retaining ring. all options i can find fit a 5-1/2" light. mine are 4-1/2. have both buckets and only 1 retainer ring.

#3 gauges. currently it has a oil pressure, engine temp and a volt gauge. i assume since i have a fuel sending unit and it was originally 6v and that the volt gauge should go.?

#4 what is/was the red light to the bottom left below gauge?

#5 lever right side below seat. two positions, position control and draft control. whats it do/for?

#6 lever left side below seat? whats she for??

#7 headlight switch. is this the rusted switch on the right side of column below instrument cluster? kinda hidden and very rusted.

#8 front badge. since it is an industrial should it say industrial or did they use one of the wheat badges?

thanks for any and all of your help.

jeff and dana

4. This was the generator tel-lite since it had no ammeter or voltmeter.

5. Position control (up) operator controls implement height by means of the big lever right of seat. Draft Control (down) used for plowing, cultivating etc. Load on 3pt controls height of implement. (if it pulls harder it raises the implement to match the load sense set by the big lever)

6. He is the PTO engagement lever.

7. Correct

8. Industrial

Hey Jeff, I'd love to talk to you about your conversion. Wondering if you decided to go through Tony or Jackson Power Steering. Also I'd still be interested in trying to rebuild your old cylinder. I've tried mine and still have a little leak. Also interested in the tie rod ends on both ends of the cylinder. If you have some time could you call me? Thanks Rick

I probably can answer many of you other questions about your rebuild/restore.

(678) 427-9964