851 missing taillight wires

JOHN'S FORDS

New User
The taillight wires are missing on my 851. Does anyone have a photo of how the wires are routed along the side if the tractor?
 
Lighting kits were never factory installed items -all were dealer supplied optional accessories, so tractors were sold without lights unless you bought the light kits and had them installed before delivery. So that explains why you don't see any wires. The wiring is routed from the switch down along the tranny housing and to the back then along the axles. I'm just going by my 8N wiring diagram but assume they are all the same. You can get more info on the 'other' Ford N Tractor site.


[i:654c4848f0][b:654c4848f0]<font size="4">Tim *PloughNman* Daley(MI)</font>[/b:654c4848f0][/i:654c4848f0]<table width="100" border="1" cellpadding="0" cellspacing="0" bordercolor="#000000"><tr><td height="25" colspan="2" bgcolor="#CC0000">
<font color="#FFFFFF" size="3">*9N653I* & *8NI55I3*</font>​
</td></tr><tr><td>
TPD9N100.jpg
</td><td>
TPD8N100.jpg
</td></tr></table>
 

does you tractor have clips on the left side to hold the wire? There is also a hole through the flange of one of the housings. They originally ran in cotton loom which was coated in asphalt.
 
Two clips on brake shaft and one on axle housing, rest are missing.Where can I get these clips and where do they go?
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top