jasonc100178
New User
Ok so I got this old gas 3cyl 3400 non running, I went threw basic trouble shooting, rebuilt the carb and got her runnin. Here's the problem I pulled on the selector nob for raising the three point hitch, it moved a 1/4 of an inch and the three point raised, I then tried to drop the hitch the selector nob still only moved a 1/4 inch but the rear never dropped. So I opened the top of the case (lots of rust) I cleaned it all up put new o rings in and reassembled. Now when I removed the piston I put it in a press to drop the piston back and I was able to get free movement of the selector nob when the piston was out now I put it all back together the three point dropped down but still no movement out of the selector nob and the 3 point won't move at all. Please help I'm racking my head. (Im a jack of all trades but tractor illiterate )