871 rear work light

Is the bulb frosted? what about the bolt to fender, wasn't hollow originally, but hole for switch on casing. Don't see many Fords around here, restored at least and letting this restore go to long, but money lets you down sometimes. College,Taxes, but no death thankfully. Yhanks for info. Dave
 
It should look like this one.

wklight3.jpg

.
 
The mounting bolt is hollow for the wire to go through and there's a switch on the housing. If your mounting bolt is not hollow you may not have an original Ford/CM Hall worklight.
 
The mounting bolt is smaller than headlight, right. If so need part number and will direct to you. Got one from somewhere and same as headlight. Switch part number also.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top