What does this swinging drawbar bracket fit?

Norm43

Member
Took this off a 740 row crop awhile back. It was jerry rigged on. It's in good shape but I don't know what it really fits..

Does anyone know!

Thanks in advance.
a179432.jpg

a179433.jpg
 
Looks like the2000/2600/3000/3600 bracket comparing it to the parts diagrams. The 4000/4600 bracket has those 4 holes on that flat trapezoidal section out closer to the corners. The bracket for the 5000/5600 and larger looks completely different.
 
That's kinda what I was thinking after looking at
the parts diagram. But the front mounting holes
don't look quite right to me... maybe modified a
bit? Bent inward?
As to price... I don't really know. I think the last
one I saw on ebay sold for around $50. Shipping cost
would play into what someone would be willing to
pay.
 
I've replaced the one on my 4600... this one IS from a 3-cyl. The ones for 5000 and bigger models is MUCH thicker/heavier.
 
Thanks for all the responses. I just hate to see old tractor parts go in the trash heap or recycle. I can be reached at 801-644-4939 if anyone wants to discuss this piece.
 
Norm's is for 2/3/26/3600 size tractors.
In the photos below the dirty one is for the smaller tractors and the clean one for the 4000,4600s
In addition to the different bolt hole locations notice how the clean one is thicker looking at it from the back.
I would guess you should be able to get $50 for yours pretty easily.
I called a boneyard about one once for one for a 4000 and they wanted $125 for it.

100_1944.jpg


100_1943.jpg
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top