Ok bought 2 rotor clips ,good thing and like $6 a piece. My dust cover keeps getting stuck in the distributor cap pulling off the rotor and breaking out the center of the dust cover and flinging the new clip out into the snow, put on last clip . Still not starting . I have power to the coil I think the coil or the electronic ignition module. I have no spark I'd left the key on a while back maybe has something to do with it. But was running great and just plain quit. I'm pick up a ohm meter tonite but may not mess with it till Sunday supposed to be better outside. It's in the drive way broke down. It's nasty outside here I-94 is closed a 100 car pile up say closed til Saturday. I just can't figure out why or how the dust cover would be so tight in the cap. Thanks J.R.