800 W/Power Down?

Fuddy Duddy

Well-known Member
Looking at an 800 tractor on CLs. Seller says the 3 point "has 3pt with power down". Was there an 800 series tractor with power down? Or can it be added? I've never heard of that option.
 
Since all I see is the gear to run the proofmeter and not the entire pump and don't see much of the top cover but do see two line running towards the back of the tractor from the valve he might have rigged up some kind of 3pt with down pressure Unless of course he was talking about the loader having down pressure.

Kirk
 
I think he's saying the loader has down force and a hydraulic tilt bucket rather than gravity down and trip bucket.
 
Maybe he has some sort of hyd center link set up which would sort of give it power down. But then I have found many people on Craig's list don't have a clue as to what they even own
 
I have thought about doing this on my tractor to avoid spending money on a dual remote valve.

Temporarily remove the loader arms and use the loader valve hydraulics to drive cylinders on the back.

He may have hydraulic top link and tilt cylinders connected to the loader valve outputs.
a175905.jpg
 
Though you could do what you propose, neither a hydraulic top link nor hydraulic tilt cylinder(s) will result in down pressure at the three point.

Dean
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top