Ford 660 Hydraulic ;ift renuild.

Is there a complete kit to rebuild the hydraulic lift system on a Ford 660 and about what would it cost to have the whole system rebuilt?
Thanks,
Terry
 
You need to give us more to go on.
What is it doing - or not doing?
A new lift piston seal and top cover gasket is only about $20.
The adjustment procedure for the lift linkage is explained pretty well in the I&T FO-20 manual.
The "hydraulic system" does include the pump too you know. Just not enough info to help much.
 
(quoted from post at 18:18:20 10/13/14) Is there a complete kit to rebuild the hydraulic lift system on a Ford 660 and about what would it cost to have the whole system rebuilt?
Thanks,
Terry
"about what would it cost to [u:e577c32093]have[/u:e577c32093] the whole system rebuilt?...........so much that you might want to consider another tractor or do it yourself.
 
(quoted from post at 19:31:51 10/14/14) After about an our of use the three point won't raise anymore. Let it set for an hour and it will work again.
ounds a lot like a leak...........fluid gets hot, thins, leaks easier. Look inside with it running hot & see where leak is located, Lift cylinder is high on list of suspects.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top