(800) 853-2651
SHOP NOW

NAA Live Power PTO

S

SStra

Member
Have seen few of these live PTO for 53 54 NAA tractors. Two
questions -

Could it be adapted to work on 4 speed 601?

How does it work - anyone got a picture of the inside components?
 
They work by using a clutch pack that replaces the solid, splined coupler between the tranny output and pinion shafts.
They have an extra handle coming out of the round cover on the side of the center housing.
Allows you to pull the handle back and stop the forward motion of the tractor without stopping the pto.
Of course stepping on the clutch still stops everything. And it's just another thing to have to handle while you are steering with one hand and raising your lift with the other.
They are expensive - when you can find one.
For my money, if I wanted live PTO I would look for a 5 sp transmission and clutch from a 55-65 660, 860, 661, 861, 961, 2000 or 4000 that had live pto and swap that in.
 
I agree with Ultra - find a 5-speed with live pto and swap that in... or trade tractors for one that already has live pto. You're going to look a long time before you find all the components for the add-on 'live' pto. Most likely cheaper to swap trannies or trade tractors, too.
 
Agree -


Just happen to see a local non running NAA on Clist for 1000 that has that unit in it. But since I have never seen one on the x00 or x01 though ask and see if anyone has ever gone that route.
 
For a grand, if it appears everything is there, I'd buy it. Those things just don't show up often. And like the post two above, you could sell it off and have a nearly free project tractor...if it wouldn't work in your tractor.
 
(quoted from post at 05:14:43 10/08/14) Have seen few of these live PTO for 53 54 NAA tractors. Two
questions -

Could it be adapted to work on 4 speed 601?

How does it work - anyone got a picture of the inside components?
Click to expand...

The 'other' N tractor site has the owners manual with lots of pics.

manuals
parts
live pto for the NAA - Owner's manual

saw the listing, too far for me and I'm not buying right now (well, trying not to anyway)
I'd take about 2200 cash with me, and buy all 3 of them............
 
You must log in or register to reply here.

Similar threads

D
Ford 4000 PTO Wont Engage
Replies
10
Views
540
Dwilshire
D
B
550 front PTO lever
Replies
7
Views
1K
BrotherJoe
B
F
Ford 4000 pto slippage
Replies
6
Views
499
FarmerBlair
F
R
Help with Ford Model 333 "Highway chassis"
Replies
15
Views
743
robinchatteris
R
L
1970 4020 synchro PTO doesn't stop
Replies
7
Views
481
lka
L
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top