William Fissell
Member
Hi,
reassembling the 841. Lift cylinder control valve
is held captive in the lift cylinder by a plate
secure w three bolts. That plate has a gasket. The
CNH site seems to be broken right now else I'd try
to dig up a part number.
Lift cover kit used to have the gasket, I think.
Now the two lift cover kits I have handy don't
have it. Urgh.
I am not sure why a gasket is needed in this spot
at all, but I am tempted to run to NAPA and buy
some gasket paper and cut my own sloppy one.
Am I missing something (else) obvious here?
thanks in advance!
Bill
reassembling the 841. Lift cylinder control valve
is held captive in the lift cylinder by a plate
secure w three bolts. That plate has a gasket. The
CNH site seems to be broken right now else I'd try
to dig up a part number.
Lift cover kit used to have the gasket, I think.
Now the two lift cover kits I have handy don't
have it. Urgh.
I am not sure why a gasket is needed in this spot
at all, but I am tempted to run to NAPA and buy
some gasket paper and cut my own sloppy one.
Am I missing something (else) obvious here?
thanks in advance!
Bill