William Fissell
Member
Hi,
I ground down the crack in my ram arm and heated
it to 500 or so in my oven (I have a hot oven,
apaprently). Filled the house with smoke as the
grease on it burned off.
All I use successfully is 6013 rod as I don;t have
an oven to store 7018. I chose 85 amps DC+. Laid
a bead, but got lost towards the end. Cleaned it
off and laid 2 more, then dunked it in sand to
cool off slowly. Also included pic of my $150
craigslist welding setup.
I ground down the crack in my ram arm and heated
it to 500 or so in my oven (I have a hot oven,
apaprently). Filled the house with smoke as the
grease on it burned off.
All I use successfully is 6013 rod as I don;t have
an oven to store 7018. I chose 85 amps DC+. Laid
a bead, but got lost towards the end. Cleaned it
off and laid 2 more, then dunked it in sand to
cool off slowly. Also included pic of my $150
craigslist welding setup.