toolgarage
Member
I finally received my operator and service manual to work from but have a question. My 1971 2110LCG looks to have a hydraulic selector shaft, but no lever. I'm trying to determine if the shaft is in the position control or draft control position.
Based on the photo, it looks like the set screw detent is at the top of the shaft, indicating it is in the draft control setting according to photos in the users manual. All I'm using the tractor for is a brush hog, so I think I need to move it to the position control setting - turning the shaft 90 degrees clockwise.
Can someone with knowledge of this confirm the position for me.
Thanks!
Based on the photo, it looks like the set screw detent is at the top of the shaft, indicating it is in the draft control setting according to photos in the users manual. All I'm using the tractor for is a brush hog, so I think I need to move it to the position control setting - turning the shaft 90 degrees clockwise.
Can someone with knowledge of this confirm the position for me.
Thanks!