crawdad185
Member
My Jubilee was converted to 12V by its previous owner. I haven't been able to use the starter button and I thought it might be the solenoid as it was some aftermarket 4 post design.
I put on a new solenoid and when I went to put on the ground cable, the tractor started cranking on its own. I didn't have the switch on so I'm at a loss for what might be wrong. I think everything is wired correctly as I followed a schematic to make sure. Can anyone who is more versed in electrical stuff help me out with this? Thanks
I put on a new solenoid and when I went to put on the ground cable, the tractor started cranking on its own. I didn't have the switch on so I'm at a loss for what might be wrong. I think everything is wired correctly as I followed a schematic to make sure. Can anyone who is more versed in electrical stuff help me out with this? Thanks