one arm loader

andy41372 · Apr 27, 2014

my 1 arm loader on my 801 is a trip type dump and I am wanting to convert it to a cylinder anyone have measurements for conversion or anyone in southern Indiana with one that I can measure???

Ultradog MN · Apr 27, 2014

It may not be that easy depending on which main upright you have.
Look at the photos below.
You will see the main upright is saddled to accept the bell crank for the hydraulic dump.
If that is what you have it shouldn't be that hard. But you will also need to make the scissors to make the bucket dump too.

souNdguy · Apr 28, 2014

i see some people that have added a smaller cyl to the front of the boom and then made up linkage as UD mentioned.

Hogleg · Apr 29, 2014

Here is how one guy did it ... saved these from a few years ago. Seems a lot simpler than the factory style. IT does not self level as the factory one but hey, my OEM Deere loader does not do that either...

John

one arm loader

andy41372

Member

Ultradog MN

Well-known Member

souNdguy

Well-known Member

Hogleg

Member

Similar threads