William Fissell
Member
Hi,
thought i'd look into the jumpy timing on my 841. Took off the two clamps. Will. Not. Budge. No twist, no up and down.
Took a piece of softwood and rapped on the bottom a few times. Nope. Heated the area of the block where it seats with a propane torch. Nope.
Sprayed with penetrating oil and gave up for now.
Any other tips?
thanks in advance!
Bill
thought i'd look into the jumpy timing on my 841. Took off the two clamps. Will. Not. Budge. No twist, no up and down.
Took a piece of softwood and rapped on the bottom a few times. Nope. Heated the area of the block where it seats with a propane torch. Nope.
Sprayed with penetrating oil and gave up for now.
Any other tips?
thanks in advance!
Bill