Rest O Ride

Ultradog MN

Well-known Member
Location
Twin Cities
What is a ROR seat frame worth?
Looks to be in good cond.
No seat pan on it.
But I measured and the flip up seat from an 8N, etc would fit.
Rubber springs look ok - still intact anyway but I suppose they would need replaced at some point.
I never followed them so I don't know.
Thanks
 
I'm not sure what the frame would bring, but the rubber springs
are close to $100 new. Probably only relevant if you are wanting
to use it and need to replace them.
 
I rebuilt the one on my 860. New springs, bushings were close to $150.......back in the day, the complete seats were bringing $175+ on the Bay.

There is one on there now for $75 but looks pretty rough.

Tim
 
(quoted from post at 22:17:56 03/30/14) What is a ROR seat frame worth?
Looks to be in good cond.
No seat pan on it.
But I measured and the flip up seat from an 8N, etc would fit.
Rubber springs look ok - still intact anyway but I suppose they would need replaced at some point.
I never followed them so I don't know.
Thanks

I just scored a good core on eBay to rebuild for 30 bucks plus shipping. Missing the screw adjustment handle, but I'll make that.
 
I have several of them and have rebuilt all.

Some came with tractors that I have. All others were given to me.

Properly rebuilding a R-O-R is time consuming and expensive.

Dean
 
(quoted from post at 20:04:28 03/30/14) Properly rebuilding a R-O-R is time consuming and expensive.

Dean

Yes but if I had to do it over again I would rebuild mine instead of replacing with a new after market seat. The new seats sit way to high and you feel crouched over while driving.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top