Ford 641 question

Jim in Ma. · May 28, 2013

I just picked up a 641 It came with a book but I cant find anything about what type of oil goes in the power steering. other then that being low, everything works fine on the tractor. Thanks

Ultradog MN · May 28, 2013

Generally the same 134D oil that you use in the tranny and rear end.

souNdguy · May 28, 2013

very likely you COULD top the ps off with any of the following:

hyd oil ( aw/iso 32/46 etc ). UTF fluid. REAL power steering fluid / atf type f or dx/merc3, or even 10-30 w oils.

what would most of us use? UTF fluid. the common ones .. even store brands.. most meet the ford spec m2c134d some meet the older a-b-c 134 specs. all them specs postdate that machine by decades so would be fine..

old · May 28, 2013

I use ATF in my 841. I tried the UTF and found it did not work as well as the ATF did and have never used the UTF again and stick with ATF

Ford 641 question

Jim in Ma.

Well-known Member

Ultradog MN

Well-known Member

souNdguy

Well-known Member

old

Well-known Member

Similar threads