TM_1957Ford600
New User
Ok so I attempted to cranks my project for the first time since I have been working on it and when I hit the starter button...nothing. Here are the steps I have taken up to this point with the help of the shop manual.
New battery - 6v fully charged
New keyed ignition
New 6v solenoid
New battery cables
Ran down all wiring and they are in the correct locations
Only thing u haven"t tried is a new voltage regulator and starter button. Even when I turn the ignition key...crickets! No click or nothing. I am getting some spark when I touch a screw driver across terminals on the volt regulator. That"s about it. Any ideas on what to try next
Thanks in advance
New battery - 6v fully charged
New keyed ignition
New 6v solenoid
New battery cables
Ran down all wiring and they are in the correct locations
Only thing u haven"t tried is a new voltage regulator and starter button. Even when I turn the ignition key...crickets! No click or nothing. I am getting some spark when I touch a screw driver across terminals on the volt regulator. That"s about it. Any ideas on what to try next
Thanks in advance