hyd seal

Anonymous-0 · Jan 17, 2013

my ford 640 has a front loader made of steel tubing ,the hyd fluid is stored in the right side lift arm .the pump for the loader is set in front of the radater grill, I cant find the seal that slips on this shaft for this external pump. thanks for any help.
p.s id is 3/4 od is 1-3/8.

GlenIdaho · Jan 17, 2013

If I understand you correctly, you need a seal for the pump. Over the years the pump may have been changed out for another make. So, you need to determine the make and model of the pump. Contact you local hydraulics shop and give them the name and model of the pump and they may be able to help you with rebuild parts. If that does not work, pull the pump and remove the seal and take it to a bearing shop to see if they can match it.

TMFORDY · Jan 17, 2013

Do you have a picture of the loader? Sounds like a wagner as a guess. I just came across a pump from a 6xx that had a wagner.. And I am in need of a couple 24" rears on rims.

gatchelguy · Jan 18, 2013

Measure the shaft and the bore with a dial caliper and call a bearing suppoy house.

hyd seal

Anonymous-0

Well-known Member

GlenIdaho

Well-known Member

TMFORDY

Member

gatchelguy

Member

Similar threads