Have a question about reversing wheels. Starting to plan for replacement front tires for our 3400 TL (not TLB). The fronts are now 7.50x16 truck tires. Because of the loader, I'd like to use 7.50 again, either another set of used tires or new 3-rib ag tires. However, I've noticed that the current 7.50's have always been rubbing the front knees - just kissing, not a heavy worn rub ring on either tire.
So, my question: Can I reverse the rims? They're the standard 16" ag rims, with the standard 1-1/8" positive offset. If I can flip them, that would give plenty of clearance for the 7.50s. But will the axles take the extra load, esp. with wet gravel in the bucket?
Thanks.
So, my question: Can I reverse the rims? They're the standard 16" ag rims, with the standard 1-1/8" positive offset. If I can flip them, that would give plenty of clearance for the 7.50s. But will the axles take the extra load, esp. with wet gravel in the bucket?
Thanks.