RBnSC
Well-known Member
This is the last pic I took yesterday. I had to leave at 12. We spent the morning trying to get it running. Were not sure if the inj. pump we had was bad or the timing was off. Took the pump off our 4000 still did not run. Turned out that the shaft that drives the pump was out of time straightened that out and it fired right up.
In the process of putting it together we got the wrong center plate and now you cannot see the timing marks on the flywheel. We had to take the starter off make marks further out.
Ron
In the process of putting it together we got the wrong center plate and now you cannot see the timing marks on the flywheel. We had to take the starter off make marks further out.
Ron