|
| |
| Ford Tractors Discussion Forum |
Topic: Re: Jubilee 3pt won't lift
[Show Entire Topic] [Return to Forum]
| Author |
[Modern View]
|
| old
12-07-2012 10:06:54
209.86.226.32
|
Have you primed the pump??? Or maybe one of the pass threw lines is messed up or the linkage if not hooked up correctly. I would prime it first then pull the dip stick inspection plate off and see if you can see something wrong
|
|
|
| soundguy
12-07-2012 11:18:46
184.4.146.28
|
|
Re: Jubilee 3pt won't lift in reply to old, 12-07-2012 10:06:54
|
|
| | he said he saw oil moving.. it's not a prime issue. my guess is a stuck unloader...
|
|
|
| old
12-07-2012 12:13:24
209.86.226.58
|
|
Re: Jubilee 3pt won't lift in reply to soundguy, 12-07-2012 11:18:46
|
|
| Ya I saw he said oil moving but was not sure where he saw it moving since a shaft can make oil move and look like the pump is pumping
|
|
|
| soundguy
12-07-2012 13:45:06
184.233.172.57
|
|
Re: Jubilee 3pt won't lift in reply to old, 12-07-2012 12:13:24
|
|
| | only shaft in the hyd compartment in the oil area is the pto.. and on a naa it doesn't need to spin to have hyds. other is the pinion coupling.. and it's out of the way.. and won't be doing anything while setting still.
|
|
|
| old
12-07-2012 16:42:09
4.244.217.46
|
|
Re: Jubilee 3pt won't lift in reply to soundguy, 12-07-2012 13:45:06
|
|
| I know the NAA/Jubilee well and yes I know the only shaft would be the PTO and it has nothing to do with hyds but then as you know you never know for sure what the guy is doing so that is why I state that
|
|
|
| soundguy
12-07-2012 16:59:16
184.247.226.48
|
|
Re: Jubilee 3pt won't lift in reply to old, 12-07-2012 16:42:09
|
|
| it's not gonna be a shaft issue....
|
|
|
| old
12-07-2012 17:03:46
209.86.226.11
|
|
Re: Jubilee 3pt won't lift in reply to soundguy, 12-07-2012 16:59:16
|
|
| You mean as in oil moving?????
|
|
|
| Jay in WA
12-07-2012 10:45:40
71.221.207.90
|
|
Re: Jubilee 3pt won't lift in reply to old, 12-07-2012 10:06:54
|
|
| I had the tractor running with the fill plug removed and could see a flow of oil coming into the hyd reservoir. That lead me to believe the pump is working. Isn't this flow of oil indicating the pump is working?
|
|
| [Show Entire Topic]
[Options]
[Printer Friendly]
[Return to Forum]
[Add a Reply]
| Same-Day Shipping! Most of our stocked parts ship the same day you order (M-F). Expedited shipping available, just call! Most prices for parts and manuals are below our competitors. Compare our super low shipping rates! We have the parts you need to repair your tractor. We are a Company you can trust and have generous return policies! Shop Online Today or call our friendly sales staff toll free (800) 853-2651. [ More Info ] |
Home
| Forums
Copyright © 1997-2013 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor Headquarters |
About this site - Yesterday's Tractors is your one-stop source for antique tractors. If you are interested in older tractors you've come to the right place! Join more than 275,000 other classic tractor enthusiasts from all over the globe. We have many resources for antique tractor enthusiasts available including photos, classified ads, more than 24 tractor discussion forums, a show guide, values, specs and much more. Bookmark this site and come back often. Thanks for stopping by! Feel free to use our feedback form to send us your comments, suggestions and ideas.
|
|
|
