ford 2000I Transmission

mdobbin

New User
I have a ford 2000I (4cyl. gas) with no 1st and reverse. Will a ford 950 transmission interchange? The 2000I is actually a 2030 model.
 
a 4 cyl 2000 is essentially a reworked 601

you can swap in an 01 tranny of the same type with probably no mods or other parts swapping. ie.. 4spd in/out.

if it's a 5spd inthe 2000, use a dual clutch model, as that is what it should have.

on an older tranny, you may have spline and brake differences... and or may be needing the flywheel to match t he clutch..e tc. ( pinion tube ).. maybee some cut n paste there as well.
 
It should work, but you will need the flywheel and the brake pedal shaft may be different. And maybe the splined connector - may have to fabricate one with coarse splines on one end and fine on the other.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top