Author	[Modern View]
old 11-13-2012 18:54:33 209.86.226.40 Report to Moderator	I know for a fact I could have gotten you the number for the kit for your carb and you could have gotten it at O'Reilly's I know because I do it all the time. As for what you used I sure as heck would not have done so but I do have a bucket of the good stuff [Reply]   [No Email]
JES in SWOH 11-14-2012 03:34:24 50.41.68.174 Report to Moderator	Re: 640 carb rebuild in reply to old, 11-13-2012 18:54:33   Hi Old What is the number for the 640 carb kit from O'Reillys? Thanks John   [Reply]  [No Email]
old 11-14-2012 07:40:03 209.86.226.40 Report to Moderator	Re: 640 carb rebuild in reply to JES in SWOH, 11-14-2012 03:34:24   Off the top of my head I can not tell you but if you need it I can get that info for you   [Reply]  [No Email]
gargriff49 11-13-2012 19:09:34 69.29.85.27 Report to Moderator	Re: 640 carb rebuild in reply to old, 11-13-2012 18:54:33   O"Reillys read off the TSX models their kit covered and my TSX-580 wasn"t one of em. I"ve had the acid base carb soaking solution in the gallon can and dip basket in the past but the tip someone on the forum gave about the full strenght pine-sol for 3 bucks worked good for what i needed to do.   [Reply]  [No Email]
old 11-13-2012 19:32:32 209.86.226.40 Report to Moderator	Re: 640 carb rebuild in reply to gargriff49, 11-13-2012 19:09:34   Sounds like you got one of the kids at O'Reilly's. I do carbs all the time and have done so for 30 years now and get the kits from the same store for those 30 years and that is a O'Reilly's and I know they have them or can have one by tomorrow. Fact is M/S made 4 sizes of carbs and so the basic kit for them all are one of 4 maybe a few more kits but that is it. I.E. A kit that fits the carb for an 8N ford is the same kit as the one needed for an Oliver 60 I know because again I have an Oliver 60 engine that has a mutt carb on it made from a carb for an 8N and the Oliver 60   [Reply]  [No Email]