Steve (Tx)
Member
I put a new Zenith carb on my Ford 2000 4 cylinder. The tractor starts immediately but the idle is super fast, in fact, it is so fast that I cannot increase the rpm"s by increasing the throttle.
As far as I can tell, there are only two adjustment screws; one over the bowl which is probably the air mixture and one at the throttle linkage. With both screws seated or both screws way out or a combo of each, the rpm"s do not slow down.
Any advice is appreciated.
Steve
As far as I can tell, there are only two adjustment screws; one over the bowl which is probably the air mixture and one at the throttle linkage. With both screws seated or both screws way out or a combo of each, the rpm"s do not slow down.
Any advice is appreciated.
Steve