Author	[Modern View]
rstokes2 10-17-2012 19:14:13 50.44.57.46 Report to Moderator	Rebuilding 1060 641 134 ci motor rebuild kit came with metal head gasket.what kind of gasket sealer should i use for this.also rolled up edge around cylinders up or down or does this only goes one way? [Reply]   [No Email]
TimInd 10-18-2012 13:56:48 75.34.192.213 Report to Moderator	Re: head gasket in reply to rstokes2, 10-17-2012 19:14:13   K&W Copper Coat gasket sealer. I use it for insurance, unless the gasket you are using specifically forbids it. [Reply]  [No Email]
soundguy 10-18-2012 05:48:05 173.107.14.80 Report to Moderator	Re: head gasket in reply to rstokes2, 10-17-2012 19:14:13   on a red tiger i'd put it on dry unless the block deck had some overzealous screwdriver or scraper marks.. and then i'd seriosly consider a decking... [Reply]  [No Email]
jkies 10-17-2012 20:46:27 208.126.102.238 Report to Moderator	Re: head gasket in reply to rstokes2, 10-17-2012 19:14:13   There is hardly ever an always,but most of the time the lettering on the head gasket goes up. Most are made to go in dry but I like to use a spray on sealer (high tac) to make it sticky. [Reply]  [No Email]
Larry NCKS 10-17-2012 19:32:07 174.253.134.221 Report to Moderator	Re: head gasket in reply to DenisW, 10-17-2012 19:14:13   That head gasket will only fit one way. I'd put it on dry and let it do its own sealing. [Reply]  [No Email]