(800) 853-2651
SHOP NOW

12V Diesel Generator

A

awhtx

Well-known Member
Charles Rowell (charles in louisiana on the other N website) brought his recently acquired 671D with original generator to the TEDTEA show in Temple,Texas this past weekend. The only cooling air cutout in the "barrel" of the generator is in the lower, inboard quadrant next to the engine block. I know it's there as I felt it with my finger.
100_1340.jpg
 
Here's one that I have in my spare parts. It originally had 4 cooling slots and someone spot welded a band of metal to cover 3 of the slots leaving only the lower, inboard slot uncovered. I wonder if Ford did this or a rebuilder?
100_1341.jpg
 
Hello Alan , Yes Ford did this when they were Remaning gens for tractors , I had one in a Ford Reman box other rebuilders may have but I doubt it as I have gotten both tractor and Car/Truck gens before from places like Napa even though they were suppose to be for a tractor . Thanks Tony
 
(quoted from post at 22:35:38 10/08/12) Hello Alan , Yes Ford did this when they were Remaning gens for tractors , I had one in a Ford Reman box other rebuilders may have but I doubt it as I have gotten both tractor and Car/Truck gens before from places like Napa even though they were suppose to be for a tractor . Thanks Tony
Click to expand...
his looks like an 8N mount that someone had a similar idea, but used a filler???
filled_slots.jpg
 
I don't know what I am replying to. I have an older model 2000D with a metal strap covering the access holes which allow you to service the brushes. The 3000D is covered like the red one in the pics. Both are original as far as I can tell.

Mark
 
Hello JMOR , I have seen filled ones like that also but always on a tractor never a new one in a box so I don't know who was doing that myself . Thanks Tony
 
You must log in or register to reply here.

Similar threads

W
Ferguson TE20 - converted to 12V with a generator?
Replies
9
Views
859
Jim.ME
J
zuhnc
6V, 3 Brush generator no output
Replies
4
Views
230
zuhnc
zuhnc
R
12v Generator test question
Replies
15
Views
2K
rrlund
R
W
2n-10000-C generator rebuild wrignt up needed
Replies
6
Views
843
woodman1928
W
T
FORD TRACTORS - ELECTRICAL SYSTEMS 101
Replies
4
Views
1K
Mad Farmer
M
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top