Author	[Modern View]
mdobbin 09-08-2012 11:19:13 67.249.52.98 Report to Moderator	I have a ford 2000I (4 cyl) that is missing 1st and reverse gears. Will a NAA transmission fit it? [Reply]   [No Email]
mdobbin 09-19-2012 17:08:48 67.249.52.98 Report to Moderator	Re: ford 2000 industrial (4 cyl) in reply to mdobbin, 09-08-2012 11:19:13   Sorry I have not responded back on the great info you guys have provided. I do have a NAA donor from the tranny back with pto and 3 point. I see what Tony Jacobs said about outside hyd. lines on the NAA and internal on the 2000(4cyl). Is there any hope on this? MIke D [Reply]  [No Email]
TONY JACOBS 09-08-2012 21:03:36 205.188.116.9 Report to Moderator	Re: ford 2000 industrial (4 cyl) in reply to mdobbin, 09-08-2012 11:19:13   You can use the gears out of the NAA Transmission to repair yours but as Chris said that's where the fun ends . The cases are different the NAA has external hydraulic lines the 2000 has internal hydraulic lines ands there is nothing you can do about it . Thanks Tony [Reply]  [No Email]
soundguy 09-08-2012 19:01:54 184.245.173.137 Report to Moderator	Re: ford 2000 industrial (4 cyl) in reply to mdobbin, 09-08-2012 11:19:13   your 2000 engine will BOLT to a naa trans.. but that's where the fun ends. [Reply]  [No Email]
mdobbin 09-09-2012 18:14:54 67.249.16.2 Report to Moderator	Re: ford 2000 industrial (4 cyl) in reply to soundguy, 09-08-2012 19:01:54   The tractor is a 2030 with a backhoe and no 3 point hitch. [Reply]  [No Email]
soundguy 09-10-2012 05:38:07 184.245.116.112 Report to Moderator	Re: ford 2000 industrial (4 cyl) in reply to mdobbin, 09-09-2012 18:14:54   but.. if you hav ethe naa trans as a donor.. the gears would work, if you needed them. if it is a gear issue.. not not a shifter fork.. etc.. etc.. [Reply]  [No Email]
soundguy 09-10-2012 05:36:13 184.245.116.112 Report to Moderator	Re: ford 2000 industrial (4 cyl) in reply to mdobbin, 09-09-2012 18:14:54   and?? the naa trans is not compatible with a 2000 model trans. [Reply]  [No Email]