IHFORDFARMER
Member
she is finally all done, was messin around before the storm came
- Thread starter IHFORDFARMER
- Start date
Ford9000puller
Member
Looks great!! Is that a weight bracket on the belly I see? Have you pulled it yet? We have a 5200 with a turbo we pull quite a bit.
mark in boonville ny
Member
that looks great.
Do you still have the original fenders? I would love to buy them from you.
Looks like a later model 1973-75 tractor with dual power, load monitor AND 2 remote valves! She was decked out with all the options when new. Did you find a source for the decals around the PTO, remote valve levers, 3ph, draft control lever? The decal that goes behind the Load monitor phasing lever was still available from Ford back in 2002 when I painted mine, but hardly any of teh others were available or correct. Finding decals for those things is near impossible!
George Bradish had a few listed on his site.
As a fellow Ford 7200 owner (1975 model) I must say I am extremely proud to see someone else have a passion for this tractor. They are the best 1970's row crop tractor ever built. Hands down.
Thanks for sharing!
Looks like a later model 1973-75 tractor with dual power, load monitor AND 2 remote valves! She was decked out with all the options when new. Did you find a source for the decals around the PTO, remote valve levers, 3ph, draft control lever? The decal that goes behind the Load monitor phasing lever was still available from Ford back in 2002 when I painted mine, but hardly any of teh others were available or correct. Finding decals for those things is near impossible!
George Bradish had a few listed on his site.
As a fellow Ford 7200 owner (1975 model) I must say I am extremely proud to see someone else have a passion for this tractor. They are the best 1970's row crop tractor ever built. Hands down.
Thanks for sharing!
IHFORDFARMER
Member
whe is a work horse on our farm, we've restored a few before her, and they get waxed up to go to shows and i like pullin them in farm stock classes, I will check where the we got the decals from but i know we need some for the dash yet. also its a '75
IHFORDFARMER
Member
it had a cab, and we had an extra set of 7600 fenders from our other 7600
Ultradog MN
Well-known Member
- Location
- Twin Cities
Beautiful!
Thanks for the photo.
Thanks for the photo.
http://georgebradishtractorparts.com/images/fordDecals/D785.JPG
There is the correct shift pattern decal, for 1975.
The other decals that belong on the dash are the "pull to tilt" below the tilt steering knob, "air cleaner" warning light decal, dual power rabbit and turtle along side the dual power lever, a warning decal not to use ether or manifold fire will occur, and a general safety decal about transmission will not hold tractor from drifting on a hill. I'll get a picture of my dash. it is unrestored. My father ordered our Ford 7200 new from Ford in 1975, in January. (He was a Ford tractor salesman at the time) He took delivery in July 1975.
here is a link to most of the other dash decals. On page 4, I think you will find the remote hydraulic and 3ph raise lower decals, also...
http://georgebradishtractorparts.com/fordDecals.jsp?page=decalsPage5
http://georgebradishtractorparts.com/fordDecals.jsp?page=decalsPage5
IHFORDFARMER
Member
Pulled sunday got out pulled by my brothers boss Case 870 with turbo,by 18 feet.but put 20 feet on a bunch of JD 4010's and 20's.Next up for restoration is our Ford 7600 just waiting for dual power and clutch parts.Good friend has set of original 7000 RC fenders and we have an extra set of 7600 fenders.If anyone needing fenders
IHFORDFARMER
Member
Dad said send them over we can restore them to look like this.Just email.
Nice. A neighbor bought a brand new one in about 1971-72 and we borrowed it occasionally (he was just a part timer). His partner in the farm had a utility version, also new. I got to use the row crop for plowing and disking. It was a world of difference from our Commander 6000. Your pic brought back a lot of good memories of those times.
Hey, could you email me at [email protected] about those original fenders for the 7000 row crop? I'd really be greatful!
Similar threads
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy