Author	[Modern View]
train man 05-22-2012 18:14:40 75.105.32.39 Report to Moderator	ware can I find an adpater to make a 1" pto into a standerd 1 1/4 ,Iam new to tractors so I can use all the help I can get ,thanks [Reply]   [No Email]
train man 05-23-2012 19:28:09 75.107.96.58 Report to Moderator	Re: ford 640 pto in reply to train man, 05-22-2012 18:14:40   thank,s for all your help,like I said Iam new to this. ps.a salesman at tractor supply said those were the size I had & the size I needed.   [Reply]  [No Email]
soundguy 05-24-2012 07:32:02 184.233.143.237 Report to Moderator	Re: ford 640 pto in reply to train man, 05-23-2012 19:28:09   like most counter people.. he's a dumbazz. remember that next time you ask him for something important.. as you know he is a source of dis-information.... :( :(   [Reply]  [No Email]
soundguy 05-23-2012 11:10:38 173.105.174.205 Report to Moderator	Re: ford 640 pto in reply to train man, 05-22-2012 18:14:40   to go from 1 1/8 to 1 3/8 you can get a stub adapter.. it's way better than the lil sleeves.. the stub adapter slips on and looks just like an OE large size pto..   [Reply]  [No Email]
NoNewParts 05-23-2012 04:43:22 67.240.145.25 Report to Moderator	Re: ford 640 pto in reply to train man, 05-22-2012 18:14:40   any farm store will have adapting ORC's, sleeves, adapters ORC is the best way, but if you need to just use an adapter or sleeve adapter, check them often. The modern import steels they're made of aren't too good and they wear quickly.   [Reply]  [No Email]
old 05-22-2012 19:42:56 209.86.226.57 Report to Moderator	Re: ford 640 pto in reply to train man, 05-22-2012 18:14:40   Better back up a bit. There are 2 sizes of PTO shaft. One is the old type 1-1/8 and the standard is 1-38 not as you said. Best way to get what you need is buy the common ORC which you need if you use much if any thing on the PTO to keep you from killing your self or some one else. Never has been a 1 inch or 1-1/4 PTO shaft just the 1-1/8 old type and he new 1-3/8 or the newer 1000RPM type but we will not go there for this tractor since it never has or will have that   [Reply]  [No Email]
kathleen kanzler 05-22-2012 19:24:16 69.43.214.22 Report to Moderator	Re: ford 640 pto in reply to train man, 05-22-2012 18:14:40   I think you want to go from 1 1/8 to 1 3/8 for your PTO. you can use and adaptor or OCR depends on what you want to do. this site or your local farm store sells them   [Reply]  [No Email]