Hi all, I recently picked up my brand new to me One Arm and I am getting my goodies together to build brackets with help from a friend who is a machinest. So here goes...
I have a 1972 Ford 3000 and I have the correct loader for that tractor according to the previous owner but no brackets. No problem says my machinest friend, we can build them. So we will get started. I would like to have a general dimension that is a correct starting point.
I would like to know the measurement from the top aft bolt of the hip bracket to the "nub" the loader sits in. I would like to know its measurement from the center of the bolt hole to the center of the nub measuring in a strait line aft and then from that point, measure strait up from the bolt line center to the center of the nub. This will give me two sides of the triangle and a good starting point. The other brackets can be fabbed where ever the loader falls in.
I have a 1972 Ford 3000 and I have the correct loader for that tractor according to the previous owner but no brackets. No problem says my machinest friend, we can build them. So we will get started. I would like to have a general dimension that is a correct starting point.
I would like to know the measurement from the top aft bolt of the hip bracket to the "nub" the loader sits in. I would like to know its measurement from the center of the bolt hole to the center of the nub measuring in a strait line aft and then from that point, measure strait up from the bolt line center to the center of the nub. This will give me two sides of the triangle and a good starting point. The other brackets can be fabbed where ever the loader falls in.
