Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Ford Tractors Discussion Forum
Order Ford 640 Parts Online

640 Oil Capacity

Welcome Guest, Log in or Register
Author 
Joe Neuhaus

09-03-2004 08:27:20




Report to Moderator

How much engine oil does a 640 tractor take when changing?

Thanks Joe




[Log in to Reply]   [No Email]
Mike in OH

09-04-2004 05:02:44




Report to Moderator
 Re: 640 Oil Capacity in reply to Joe Neuhaus, 09-03-2004 08:27:20  
With the filter changed as well, my 640 takes 6-1/2 quarts to get it to the full mark on the dipstick..... ..... .....



[Log in to Reply]  [No Email]
txblu

09-03-2004 10:15:36




Report to Moderator
 Re: 640 Oil Capacity in reply to Joe Neuhaus, 09-03-2004 08:27:20  
I think 6 with filter. Put in 4 and check the dipstick. Fill to top of full mark on DS and run to get oil into filter. Stop engine, wait a couple of minutes and check again. Top off as required to get to top of full area.

Mark



[Log in to Reply]  [No Email]
Joe Neuhaus

09-03-2004 12:18:23




Report to Moderator
 Re: 640 Oil Capacity in reply to txblu, 09-03-2004 10:15:36  
Thanks for the info, should not be too hard that way.

Joe



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy