(800) 853-2651
SHOP NOW

Ferguson 7-AEO Sickle mower

G

Gearhead210

Member
Acquired a 7 ft ferguson/Detroit harvester sickle mower. After getting all the right brackets for it, mowed for about 1/2 hour and the U-joints started coming apart- I can't seem to locate the right one for that. Does anyone in internetland have a parts book or the new "weasler" number for the ujoints?
Thanks in advance for any help

Richard
 
They are a standard size and you should be able to get them. The usual cause of failure is if the joints are rattling when you lift or in work, that means they are running out of line and that needs to be sorted out as it isn't mounted or adjusted correctly. I will look later to see if I can find a number for you...John(UK)[email protected]
 
In this case it is that I am the first one to use this mower in 30+ yrs, just needs a little tlc to get back to par. I haven't been able to get a number on this from the dealer, so if you do have one it would be great

Thanks

Richard
 
I have a parts list for this mower and I also have the Operators Book as well If you want either of them you will have to email me at the address below and then I can send it to you.
John(UK)[email protected]
 
Have you looked to see if New Holland still has them available? I recently got a part for my 6AEO from messicks.
 
So here's an update on the U-joint. The U-joints on the mower are external (in yoke) snap rings, but the only available U joints with the same dimensions are internal (on bearing cup) snap rings. I bought one of these and had to do a small amount of grinding on the insides of the yoke to remove rough spots, and the internal snap ring version works just fine. For future reference the part number is a 200-1-675 from Burns Industrial, same u joint that is used on lots of farm truck hoists.

Thanks for all the help- maybe this post will help someone out in the future as well
 
You must log in or register to reply here.

Similar threads

L
JD M-20 Sickle Mower info/parts
Replies
6
Views
464
Landry
L
J
ford 515 sickle mower
Replies
11
Views
1K
Texasmark
T
D
Super C Sickle Mower axel clamp or cylinder stop?
Replies
5
Views
394
Don Mountain
D
D
2C-F21 sickle bar mower parts for Super C
Replies
11
Views
456
Don Mountain
D
R
Ford 501 Sickle Bar Mower
Replies
4
Views
459
paul
P
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top