(800) 853-2651
SHOP NOW

Steering Box Seals TO-30

W

Wolfwise

New User
Hey all, I am in the process of rebuilding the steering gear box and replacing the bushings and outer dust seals. Can anyone tell me how to remove the old seals. They seem to be pressed in pretty tight and I actually screwed one side up (gonna replace so its no biggie) trying to pop it out. Do I need to replace the bushings inside each side also or only if there is alot of wobble? Thanks in advance.

Wolfwise
 
I just took a screwdriver and popped the seals out with no problem. If there is a lot of play the bushings should be replaced. You are right replacing anyway so no biggie.
 
My seals had been installed with some sort of sealant that forced me to tear the old seals up to remove them. The box is pretty thin so don"t put too much force on it.
 
You may already have parts, but I believe you can get a kit of bushings and seals from Nolt's Equipment in PA (1-717-776-6242).
 
Thanks for the replies everyone. I have pulled and pryed and they are really stuck. Gonna try a bit of heat next ever so carefully around the edges to see if they get unstuck. I love working on these old tractors. Nothing ever really complicated, just basic knowledge. And the best part. NO DARN COMPUTERS..Yeah!

Wolfwise - Old Tractor Fan
 
You must log in or register to reply here.

Similar threads

H
Case 310B Utility Tractor Power Steering Rebuild
Replies
17
Views
1K
BarryfromIA
B
B
1976 ford 3600 steering gear box lower roller bearing he
Replies
2
Views
260
Billy OK
B
D
Case IH 4210 power steering cylinder removal
Replies
0
Views
231
DarylinKY
D
RedMF40
Replacing Farmall A Steering box
Replies
6
Views
306
jimtrs
J
O
D-14 Power Steering Seals and Secrets
Replies
3
Views
537
DrAllis
D
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top