looking for rubber elbow for MF 65

Mark from the Fort · Nov 1, 2008

I already posted this on the MF site, but figured I'd throw it out to you all.
I just bought a narrow front 65 and the rubber connector between the air intake tube and the carb. is shot.
Not like on a 35 where is comes straight off carb with short radiator hose.
This one enters from the front of the carb and is a molded elbow in shape. THanks, Mark

Jerry/MT · Nov 1, 2008

Can you find a molded radiator hose that might work?

Anonymous-0 · Nov 2, 2008

I just checked on these at the dealer and they are available I think he said they were about 20 bucks I wound up finding a piece of radiator hose laying around that worked fine.

Jeff-oh · Nov 3, 2008

Mark,

I had to get one of these for my MF-65. They are available from Agco. ~$18.00 3 years ago. So, $20.00 today is about right.

I got mine from my "local" MF dealer (still about 1 hour away... they do ship across the country.) I have found their prices always fair.

The Equiptment Super Store www.equipmentsuperstore.com
Toll Free: 877-FARM-PARTS 877-327-6727

BTW: PN is 184277M1 Elbow, Tube to Carb

This is for the Gas engine. (Carbs not on Diesels right?)

Jeff
The Equiptment Super Store

Jeff-oh · Nov 6, 2008

Did you do that on a MF65? The Air tube and the Carb inlet are different diameters.

Anonymous-0 · Nov 6, 2008

I did do that on a mf65 and yes they are a different sizes. I found a hose that was molded with an expanded end that had about a fourty five degree bend on the end it worked great. I do know that the dealer said they could get them so they are probably aftermarket parts now available for this.
hope this helps.

ben

looking for rubber elbow for MF 65

Mark from the Fort

Member

Jerry/MT

Well-known Member

Anonymous-0

Well-known Member

Jeff-oh

Well-known Member

Jeff-oh

Well-known Member

Anonymous-0

Well-known Member

Similar threads