TEA20 Oil Pump Change

Barry (AB) · Jun 2, 2008

How difficult is it to change the engine oil pump on a TEA20?

John (UK) · Jun 3, 2008

Quite easy to change it, drop the oil, remove the strainer for the Oil Pump from the side of the Oil Pan, then remove the two 7/16" bolts through the oil Pan at the bottom of the axle carrier, slacken slightly the other four 5/8" bolts holding the Carrier to the Cylinder Block so the Pan will be able to drop, and then remove all the bolts securing the oil pan to the Block. The Pump is held on with three nuts and is straight-forward to dismantle. If the pick-up pipe is loose it should be brazed into a horizontal position or it will draw air...John

Barry (AB) · Jun 3, 2008

Thank you for the information, I will give it a try.

TEA20 Oil Pump Change

Barry (AB)

New User

John (UK)

Well-known Member

Barry (AB)

New User

Similar threads